Parametric clothes pegs

If your clothes peg bag is full of half pegs and springs, this model is for you. Print replacement peg halves to match half-pegs and springs that you find.

How to use:

• Measure your existing spring and/or peg half according to the dimensions photo.
• Open peg.scad and modify the parameters at the top of the file
• Print!

If you need both halves of the peg, print the model twice - they're symmetrical.

The STL files supplied probably won't fit your springs - they all seem to be different. But in case they do, they're named as follows:

Peg-A-B-C.stl where:

A=springCoilDia

B=springLengthOverall

C=springWidthOverall

The other dimensions are not critical for fitting the spring, but if you're trying to match an existing peg half you'll probably want to modify more of the parameters.