The original 3mm walls of the TUSH (The Ultimate Spool Holder) were way too thick to fit inside of the generic cereal boxes I had while using a 68mm wide Bambu spool.
The walls in this remix are 1.4mm, with added reinforcement along the bottom to keep it strong despite the thin walls.
It's compatible with TUSH++ rails. Since the walls are thinner, it wobbles a little bit on the rails. If this is a problem, the wedges can be used for extra support.
Instructions
All items can be printed without supports.
I used a 0.4mm nozzle with 0.2mm layer height on a Bambu P1S.
Steven La
