Philips beard trimmer 9000 Prestige BT9810/15 Stand

The Philips beardtrimmer BT9810/15 is a premium device but lacks one important feature - a stand! So when there is no thing I have to design and print it.

With this design you get a stand for securely storing your BT9810/15. And you get  a storage place for the comb accessory (that otherwise can be lost easily). 

Preliminary there is a monochrome Version only. The colour version will follow shortly. It can be printed in colour without having a MMU (Colour Printer Option) by using a single filament change. That’s why the coloured logo is printed separately And in higher resolution. 

The monochrome version prints in one piece (incl. logo).
 

Printing:

I used my favorite Filament: Prusament PETG (but PLA or everything else of course should be possible)

0,40 nozzle with standard 0,20mm layer height and 3 perimeters 

NO  supports required (printed in natural upright position)

for the colour version the logo is printed with higher resolution using the 0,25 nozzle and only one filament change (manually or automated with MMU)

Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments.   I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so. 
And of course a like ♥ or a rating ⭐ of the design are always welcome. 

happy printing, clamikra