Laced placemat Doily

A cool placemat that mimics the looks of a laced one made from fabric. perfect for your mom or grandma!

This is not an easy print! it requires a very leveled bed with a good adhesion and a good retraction.

Print with 0.2mm layer height, it is a total of 2 layers (0.4mm thin)
I found the best results were using only 1 wall and regular lines top/bottom pattern. i tried concentric and lots of walls but it was looking like a spiderweb.

Bonus tip: use “Monotonic top/bottom order” setting in Cura or any other equivilant setting in your slicer to reduce the lines pattern in the flat part.