Side facing door mount for TP-Link Tapo C200/C210 cameras for Bambu Lab printers.
Features:
Door can be fully opened without needing to move the camera
Camera angled slightly down at print bed to better see first layer squish
Adjustable camera distance
Hidden cable channel for a cleaner look
Camera remains easily removable
Hardware required:
4x M3 hex nuts
2x M3 x 6 mm screws
4x M3 x 8 mm or longer screws
Tapo C200/C210 mount (comes with camera, or can be printed)
Instructions:
Press fit 2x M3 hex nuts into camera mount
Use 2x M3 x 8 mm (or longer) screws to bolt together the camera mount and Tapo mount
Run the camera power cable through the rear cable channel of the base and along the top of the arm. The wider portion allows you to twist the cable gently to get around the bends
Add 2x M3 hex nuts to the underside of the base arm
Use 2x M3 x 6 mm (or longer) screws to bolt together the base arm and camera mount
Remove the 2x screws at the upper left of the printer door. Keep the washers in place
Use 2x M3 x 6 mm screws to bolt the base to the door
Mount the camera by twisting it into the Tapo mount
Print settings:
Print as orientated
Support: no (overhang is only 55 degrees, should be easy to print)
Overhang speed: if having issues printing the overhang of the base, try 20 mm/s
Notes:
Adding better lighting (e.g. riser and LED strip or ring light) will improve the glare and image quality
ja_guor
