CR-30 Printmill X-Carriage - 5 Degree Angle - Direct Drive BMG - MGN12 Linear Rail

With the original X-Carriage i didn't get good adhesion, you surely know this problem. 

20 degrees solved the adhesion problem but my prints looked terrible. So i tried a few different things and ecobra's files helped me a lot in that. 
A 5 degrees offset solved the adhesion problems and finally got me good looking prints. 

I wanted this to work with the cheapest available configuration to me, because i didn't want to waste any more money on a “maybe” again. 

BOM:

• 1x BMG dual drive extruder (or a clone like mine) 
• 1x pancake stepper
• 1x mgn12 for the X-axis
• 2x m3 heat set inserts for the hotend screws
• 1x Crypt's EB Fan Shroud / my remix for the hf adapter / any other fitting fan shroud
• optional: Cheap high flow adapter - mine leaks a bit, but for now it's sufficient