back shell for uConsole

Bought a small heatsink at microcenter for a raspberry pi and stuck it on the cpu. The window prevents the heatsink from touching and melting the back plastic.  This shown example was printed in form futura luminous yellow PLA.  Recommended to print with outside face of the cover showing opposite of the print bed.  Inner side of the part should lay flat against an FDM bed.

This WILL NOT FIT the 18650 battery compartment.  I desoldered that part of the board and replaced the connections with wires to instead take jst-ph 2.0 lipos.

update 2024.09.24 added my remix of the front panel. It's a very minor remix, with thickness increased and extended borders for the arrow keys + mouse knob.