February 1, 2024
Description
Used to try out some sample filaments i had laying around and recently lost all my shopping cart coins or tokens.
Can be printed with 100% infill, especially for translucent filament thats the best. For every other filament, the default 15% infill is just okay. You can reduce the top and bottom solid layers to three if you want.
Printed and tested with PETG, with just 3 solid layers on top and bottom its kinda flexible and is less annoying on the keychain.
I've used measurements somewhere between 1€ and 50 cent pieces. Its 24mm in diameter and 2.3mm thick.
Fusion 360 files provided as well, remix it yourself if you want.
License:
Creative Commons — Public Domain
9
Tim Fechner
