Netgear Orbi 970 Series (WiFi 7) Router/Satellite) Wall Mount

I didn't want to spend $40USD per mount for the netgear wall brackets so I made my own.  I printed in prusament PETG with a .6mm nozzle using draft fast settings in prusa slicer.  They are beefy as the routers/satelites are quite heavy.  

YOU MUST USE 2 M4x16mm screws through the bracket into the router mounting holes.  Please do not skip this.  

Back screw holes can be widened as needed with a drill or just screwing through it.

Channels in on the bottom and back can be used to pass other cables through.  

I have only tested this with PETG.

Print with support on build surface only.  

06-18-2024 added 10cm longer version for better cable clearance with some routers.  This makes it compatible with the RS700S

Works with:

BE27000 system routers

RBE973S(B)

RBE971 router

RBE970 Satellite

RS700S (+10mm version)