This steppers are for precision movement in tabletop games, especially Wargames. They are used to represent small movement intervals without touching the miniatures
The 3mf files are prepared to be printed in multicolor with only one extruder through two different prints.
These models are prepared for easy two-color printing with only one extruder, no MMU or multi-nozzle setup required.
Printer setup
- In Printer Settings → General, enable Single Extruder Multi Material.
- In Printer Settings → Custom G-code, make sure you have the following line under Tool change G-code:
M600 ; pause for manual filament change
- The Wipe Tower can be enabled or disabled depending on your preference:
- Enabled: helps purge leftover filament automatically, but uses more material.
- Disabled: lets you purge manually and save filament, ideal for small color changes or flat inlays.
Print procedure
- Slice both color parts as separate objects assigned to different “tools” (for example, Tool 0 = color 1, Tool 1 = color 2).
- When the printer reaches the color change, it will pause automatically and let you swap filament manually.
- Purge the old color and load the new one. You can extrude a little by hand to clean the nozzle.
- Resume the print to continue with the next color.
- Check for any stringing or brim before starting the next stage.
Ele Morelli
