February 8, 2024
Description
It just slides along the top of an iMac ;)
I made mine for the 2017 27" 5k iMac with the “Thin Unibody” design, but it should work with really any 2012-2020 model iMac with the same basic body. All the little print does is sit in front of the camera when you want it to, and slide out of the way when you don't.
There's a little hole for the ambient light sensor (left) and a thin layer on the left side of the camera that the green ‘camera on’ indicator light barely shines through.
Print the front face down.
License:
Creative Commons — Attribution