Multicolor Sweepa from Palworld

Adapted from the game files, this is the Sweepa Pal from Palworld in High Resolution, and separated into multiple parts for easier multicolor printing!

Feel free to use the same color for all parts if you prefer to paint afterwards.

Recommended to print the tail separately to reduce waste and print time; scale the tail up a bit for an easier fit. Use paint-on supports or support blockers so the square inset of the tail doesn't have supports inside. This will make it much easier to attach afterwards.

Print Settings:

The provided .3mf file should have all recommended settings pre-configured, but generally I recommend 0.16mm layer height (lower for single-color).

Tree/organic slim supports

6-7 walls for Purge Into Infill, 4-5 otherwise

Any % infill, higher for heavier model

25% - 50% scale recommended. Scale up the tail 1-2% larger than the body for an easier fit.

I'm also selling this as a printed model on Etsy here: https://www.etsy.com/listing/1656730066/silly-sweepa-from-palworld