April 21, 2024
Description
High laptop stand, designed for 17" laptops, without supports
Originally designed for my Asus G17, but should fit most 15" or 17" laptops.
The stand raises the laptop approx. 8-9cm at the front and runs upwards at a 30° angle.
Laptop bottom must not be thicker than 25mm.
Printing profile:
PLA
20% infill
no supports
Fuzzy skin - all walls - point distance: 0,5mm - skin thickness: 0,1mm
Weight: approx. 130g per part
Filament used: DasFilament Grüngold
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Till
