Magical Geometric Shadows Hanging Pendant Lamp Shade

Hey yall. I made this lamp using translucent filament but it'll work with a light color like white or glow in the dark. Keep the walls at 2 for the best result. This print is a single piece and will take about 425g of filament. The print setting profile included in the .3mf project for Bambu P1P works well with most PLA and is tailored to this model. The lamp will fit most pendant fixtures with a 40mm retention ring style, but below are links to the hardware I used.

The Bulb: https://www.amazon.com/dp/B09CPBLKV8?ref=ppx_yo2ov_dt_b_product_details&th=1

-This is a six pack from Amazon. I like them a lot. But any sub 10 watt LED bulb like this will do. Low wattage is critical to avoid overheating and long term deformation. If you use a low wattage LED bulb this design will last through years of continuous use.

The Power Fixture: https://www.amazon.com/dp/B0813BXC6Q?ref=ppx_yo2ov_dt_b_product_details&th=1

-This has been my favorite hemp cord to use. Its a decent length, comes with hanging hardware, and has a convenient screw on retention ring. Simply slip the lampshade over the threaded body and fasten it with the ring. Super simple assembly. Again, this design is compatible with any hanging fixture that utilizes a standard 40mm threaded body and ring system, so feel free to mount it as you desire.

-

I recommend not printing this on slingers as it's tall nature tends to not play well with them. If you do want to print on a bedslinger, I highly recommend slowing your speeds by 25-50%. Layer adhesion and bridging are very important with this print.

Prints with the widest/ring side down as featured in the plate picture. No supports needed.

General Settings for those not printing on a Bambu Lab printer or don't want to use the .3mf:

0.4mm Nozzle

0.2mm First Layer

0.14mm Layers

2 Walls

4/6 Solid Bottom/Top Layers

8% Gyroid Infill

No Supports

Please like and follow!

I would love to see everyone's makes!

Let me know how it goes for you, please.

Thank You!!!

-K