Filament tube guide for 6 PC4-M10 connectors Prusa i3MK3S

Simple PC4-M10 mounting plate. Holds up to 6 connectors, clips to the existing spool holder vertical arm on the i3MK3S.

I needed something simple to guide my filament tubes from my dry box to a usable position above the Prusa print head.  I really did not want to have to keep swapping over filament/tubes etc.

Holds up to 6  PC4 - M10 connectors through which my filament tube pass.

Note, the clip is intentionally “tight”  - If I need to adjust things on the printer I just un-clip the spool holder with this tube guide and all the tubes left in place, in my case that is much easier than un-clipping the clamp.

I have also provided the threaded nut prints that I use to secure the PC4 - M10 connectors to the plate - I did not want to thread the holes in the plate as any damage to one hole would mean a new print.

Printed in PETG at 0.2