Printing instructions:
- Print at 100% infill with a layer height of 0.06mm with a base layer of 0.1mm
- Filaments Used:
- PLA PolyTerra Charcoal Black Transmission Distance: 0.3
- PLA Prusament Lipstick Red Transmission Distance: 4.6
- PLA PolyLite Steel Grey Transmission Distance: 1
- PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
- Start with Charcoal Black
- At layer #6 (0.4mm) swap to Lipstick Red
- At layer #11 (0.7mm) swap to Steel Grey
- At layer #14 (0.88mm) swap to Cotton White for the rest.
FOR THE GLORY OF HUMANITY !
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Tacos
