Pc shelf designed for Lenovo IdeaCentre Gaming 5 Gen 7

PC shelf for screwing to a cabinet wall or desk.
Dimensions designed for the Lenovo IdeaCentre Gaming 5 Gen 7.

The shelf is screwed through the wall of the furniture board.
The head of the screw is located on one side of the furniture board and the shelf is attached to the other side of the furniture board.

The base version 1 is suitable for a 300x300 bed.

To screw the base to the handles, we need

4 countersunk screws 4x25mm, countersunk head

To screw the shelf to the furniture wall, we need

4 countersunk screws 4x50mm,

2 countersunk screws 4.5x100mm.

The base version 2 is suitable for a 200x200 bed.

The base version 2 consists of two base parts and two connecting parts.

For screwing the base in version 2 we additionally need:

8 countersunk screws 3.5x25mm.

I printed in WHITE PLA META.

-----------------------------------------------------------------------------------------------------

And as always with functional rather than decorative prints I recommend calibrating the prints on the printer using the advice of @SteveHanov, I recommend the link:

https://www.printables.com/pl/model/683647-calibration