Quest 3 Headset Mount Ikea Skadis Adaptor

I added an Ikea skadis adapter to Bengyboos Quest3 Headset Hanger.
To attach the Skadis adapter to the headset mount you will will need two 8mm M3 hex screws and two M3 square nuts (flat). To fit the M3 hex screws to the champhered holes of the hanger you hay print the small adapters included in my model.  

In my model you will find the additional files only. The original hanger can be downloaded here.

Printing:
I used PETG (Prusament Black) with 0,40mm nozzle and 0,20mm layer height.
You will need small supports for the hooks. Those are already included in the *.3mf files and the *.gcode

Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments.   I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so. 
And of course a like ♥ or a rating ⭐ of the design are always welcome. 

happy printing, clamikra