March 21, 2024
Description
The holders can be used separately or connected to the handle. The handle needs two dovetail clips added printed and attached to be used with the holders. See exploded view below.
The 20,30, and 40mm holders only have a slot to connect the handle on one side. If you want them on the other side mirror the model in your slicer. They also have an end cap that can be printed separately and glued in place afterword. The 80mm holder is intended to have a cup placed in it to hold a water.
License:
Creative Commons — Attribution — Noncommercial
7
Tekcor17
