Armattan Beaver GoPro Session holder V2

No need for full disassembly to take of top plate. Just two rear screws

Files with ms suffix - are with partial manual supports, for me print came after, just need to cut out holes with scalpel

Improvements compared do V1

• Moved forward, much more place battery, still clears camera FOV
• Place for ND filter
• Many angle versions
• Nicer Go Pro fit
• Clearance for FPV camera for high angles

I dont have ND filter, but with printed mock plates everything looks ok. To insert filter you need to bend base without gopro and just slide filter. May require some practice at first. After insering camera its practically not possible to remove filter.

It should fit ND filter with dimensions : 36x33 mm and thickness from 1.7 to 2.5mm ( think thinner or thickers filter should fit too)

Strap slot is for max to 20 mm width and 2 mm thick