Bit Holder Remix with Relief Cut Corners - Improved Bit Holding

To support me the most, please download from MakerWorld

Link: https://makerworld.com/en/models/170277#profileId-186972

Hate having to use a plyers to remove the bit? Well no longer. 

This remix has relief cuts on all the corners meaning the walls are what is holding the bit and not rounded 3D printed corners.

There are 2 versions - 

• Just with Relief Cuts
• With Relief Cuts plus cutout to insert a 6mm x 1.5mm magnet in the bottom

Snug Fit = 6.45mm width of Hex for the Bit

Normal Fit = 6.50mm width of the Hex for the Bit.

The Snug (6.45mm) will fit the best if your pressure advance and flow is properly calibrated. 

Print this version and the original and i guarantee (or your money back) that this version if far superior.