February 4, 2024
Description
I'd love to see pictures of your prints!
The tolerances on this backhoe are such that if you want the parts to move you need to print it with a small nozzle at 1 mm layer height, or scale up the model.
This model is designed to be printed without supports and On a raft. high detail on a small nozzle .25mm is recommended
This model should fit right in with agepbiz's Tiny Wheels collection.
UPDATE: Per request, I have added a backhoe model with tighter tolerances. It is untested, but will probably work better if you intend to upscale.
The repaired version has a messier-looking mesh, but it was run through Mesh mixer to make sure it's water-tight.
License:
Creative Commons — Attribution — Noncommercial
7
Gophergames
