Original Prusa Enclosure Honeycomb Storage Wall

This is a remix of the Honeycomb Storage Wall by RostaP. It is fully compatible to all released Addons and Parts related to the Honeycomb Wall.

The whole Wall is splitted into six parts, all printable on a standard MK3. Here's a list of all additional parts you'll need for assembly:

• Hex-Screw M3x12 - 22 pcs (24 pcs if you don't have the original spool holder installed)
• Hex-Screw M3x16 - 2 pcs (for fastening of the original spool holder)
• Washer M3 - 22 pcs (24 pcs if you don't have the original spool holder installed)
• Nut M3 - 22 pcs (24 pcs if you don't have the original spool holder installed)

Additional printed parts:

• insert hollow dual by RostaP - 6 pcs (listed here as 0029-000032)
• insert hollow for by RostaP - 2 pcs (listed here as 0029-000033)

Recommendations:

You can print these parts in any material you like. Please consider shrinkage, due to the size of this model. I recommend using PETG or PLA for the Wall and PETG for all inserts and attachment parts.