Revolver Station

The Revolver Station

After creating the revolver and the basic stand, I thought, wouldn't it be cool if I had a proper station that could not only hold my tool but also help me use it by separating out my bits, and giving me a few extra tools to help out whilst working. 

If you enjoy this print please consider donating to my paypal, me and the mrs have a little one on the way and we're saving for baby stuff 😁. Thought this might do better than a gofundme.

https://www.paypal.com/donate/?hosted_button_id=FWZNBTYKYP2Z2

If you have any issues, please let me know and I'll be on hand to help out or make changes if necessary.
 

Assembly guide 

This download includes a complete assembly guide with detailed instructions and diagrams.

Assembly Tips

• Make sure you use plenty of grease on parts which require it, especially the selector gear and sun gear in step 6, to ensure smooth operation.
• I recommend using a silicone grease as your lubricant as it's least likely to damage the plastic.
• As for glue, any typical super glue should be fine.  I prefer the gel types which do not set immediately and allow for adjustment. 

Printing Tips

• A 3mf file is included with suggested printing orientations.
• I used eSun PLA+ on my builds but feel free to experiment
• I printed at .16 layer height 
• You can print walls and other large parts flat instead of upright, though I like the almost brushed stainless steel look you get from the layer changes when printing standing up.