Set of bins and bottle holders for multiboard with rock solid mounting

Can't find a good compact set of holders and bins that can be securely mounted to my multiboard ( https://www.multiboard.io ), so I created my own version with a special universal fixation bolt (a modified version of the multiconnect bolt - see https://www.printables.com/model/716558-multiconnect-generic-connector-for-your-board).

I printed a Honeycomb storage wall before, but it had a lot of problems with mounting/unmounting. Attachments sat either too tight or too loose. So, I switched to multiboard as it looks better to me, but I still can't find a good set of accessories that can be attached to the wall strongly enough. I started with bottle holders and special connectors that can be screwed in with the help of a 6mm hex key, but I will add more. Check other items in my profile.

There are bottle holders of two heights: 50mm (small) and 70mm (regular) height. For 70mm height holders, it's recommended to use two bolts.

Update 07.02.2024: added a few sizes of bins with mounting. They can be printed without supports (supports are integrated into the model already).

Update 20.02.2024: mounting panel shape updated a little to fix boxes better.

The STEP file with mounting rail (the same as used in bottle holders) is attached. You can use it in your own builds.

How to mount:

First, screw the bolt into your multiboard, then install a holder AND finally screw it (do not use too much force) with a 6mm hex key.

You will find holders for bottles with diameters ranging from 26mm to 70mm.

Screw them using two types of bolts:

• 13mm-big-thread - if you use 8mm Offset snaps to mount your multiboard. 
• 6mm-big-thread - if you do not use any offset snaps to mount your multiboard (not recommended).

The loose version has a smaller size of thread.

Printing instructions:

Print with common settings; I prefer ABS.

Supports are not required; place everything on its bottom.