MacBook M1 Pro Sliding Webcam Cover (Slim)

A slim, sliding webcam privacy cover for the MacBook M1 Pro — open it when you need the camera, close it when you don't. Two printed parts (base + slider) held together by a snap-fit tab, mounted to the bezel with double-sided tape.

PRINT SETTINGS

• Material: PETG

• Layer height: 0.1mm

• Nozzle: 0.4mm

• Supports: none

• Printed on Prusa MK3S+

ASSEMBLY

1. Print the base and the slider.

2. Insert the slider into the base and push the tab down until it snaps in.

3. Test that the slider moves freely before mounting.

4. Flip the assembly and apply two pieces of double-sided tape to the back.

5. Trim the tape flush around the base with a knife.

6. Open Photo Booth, position the cover over the webcam, then press it on.

Slider test

 NOTE ON FIT Because of the cover's thickness, you may see a small gap when the lid is closed. Don't force the lid shut against the cover — close gently to avoid pressing on the screen. (rev2 [reduces this / is as thin as the snap-fit allows].)