Prusa Mk3s PSU reinforced Bracket

Replacing the black PSU is easy.

Installation of the bracket:

Parts you need:

2x … M4 nuts

2x … M4x12mm screws

2x … M3 washers

2x … M3x10mm screws

At first you have to insert 2 M4 nuts into the two hex holes on the vertical side of the bracket.

Secure the bracket to the frame with two M4x12mm screws. Finally secure the bottom part with two M3x10mm screws (don´t forget to use the two M3 washers).

Then the replacement should look like the following picture:

Have fun with this part!

Print settings i used:

PETG

0.4 nozzle

0.2 layer height

40% infill

wall line count 4