Cylindrical container shelves (stackable)

Update 24 Feb 2024: Changed the joints to screw thread, does not wobble anymore. Removed earlier version.

Organize your festive goodies! (Sometimes the snack you want is at the bottom of the stack.

• Three different container diameter size, 100mm, 110mm and 120mm. 
• Stackable concept, I have not tried more than 2 levels. Proceed with caution.
• Currently per level is around 200mm apart, let me know if there is a preference for other heights.

Recommended slicer settings for pillar:

• Retract at layer change > OFF
• Retract before outer wall > OFF
• Avoid printed parts when traveling > ON
• Brim Line Count > minimum 15

My print settings are based on CURA, there should be similar settings for your slicer.

The threads will work if printed using the same printer at the default orientation.

*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s 

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DmpFxU1

*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j 

For Amazon affiliate links
https://wp.me/peMLu6-2C