Prusa Filament Bin for Prusa Enclosure and Non-Enclosure Versions

UPDATE February 9, 2024:
Added Prusa Bin versions without the cut-outs/indents for non-closure usage. 

I liked using this bin, backwards though :), pre-enclosure and while I was still using an MK3S+:
https://www.printables.com/model/261439-prusa-mk3s-filament-trash-bin

Post Prusa Enclosure and MK4/MK4S upgrade, I used this one for a little while but wasn't a fan of the unsightly filament debris it collected:
https://www.printables.com/model/622390-prusa-bin-mk4-for-prusa-enclosure

Along with other features from other bins, and iterations to make it 3D print friendly, I created this version that both tucks in by the stepper motor and is tall with an overhang to block the filament debris from view. I raised the left edge as high as possible while still having enough clearance to install and remove the bin without touching the underside of the heater bed (even while it's operating).

Printing Stats:
Made in both PETG and PLA
0.4mm Nozzle, 0.2mm Layer Height, 15% Infill (though not thick enough for infill really)
STLs oriented and saved in the direction to print
Set supports to ON for the bin (see image of view with supports).