Sunlu S2 Pegboard Wall Mount - Sy's Peglock

Remix for the Sunlu S2 mount but for a 1" pegboard using the absolutely fantastic Sy's Peglock System.

Also have added a small recess for an air gap spacer if needed

Optional screw holes have been added on the bottom. The feet of the S2 are held on by four screws, two internal and two external. Screw holes at the bottom have been added for two #5 1 ¼" screws. Admittedly these do not fit perfectly for me, I've adjusted them so hopefully they work for you but I don't want to run a second 16 hour print just to make sure they work.

The file is editible on OnShape here: https://cad.onshape.com/documents/443429cc1e6789c557c59068/w/3f40f59c47530ddd231812f1/e/2529362a739995a124d1d216?renderMode=0&uiState=65c5c6b60057e567857c06de

UPDATE: Just an update for everyone, after a year and probably 50+ cycles of swapping out filament rolls, one of the peg lock tabs did fail, so I would recommend checking and probably replacing the peg lock tabs regularly, especially if you’re changing spools often