June 13, 2026
Description
A refreshingly simple HomePod Mini wall mount that does everything the others don't. After trying the existing options — all either too complex, needing supports, blocking the speaker, or far too easy to knock off — this design was made to fix every one of those problems.
It prints easily with no supports, leaves the speaker grille completely unobstructed for full sound, and cradles the HomePod Mini so it can't be bumped off the mount. The HomePod can also sit at any angle in the cradle, so you can aim it however you like.
A clean, no-fuss way to get your HomePod Mini off the bench and onto the wall.
Prints easily with no supports
Nothing blocks the speaker — full, unobstructed sound
HomePod sits securely and can't be bumped off
Holds the HomePod at any angle
Simple, minimal, low-material design
Original design
Setting | Value |
|---|---|
Material | PETG (almost any material works fine) |
Layer Height | 0.2 mm |
Nozzle | 0.4 mm |
Supports | Not required |
Print time | ~58 min (reference, Prusa MK4) |
Weight | ~20 g (reference) |
💡 This part isn't fussy — PETG was used, but PLA or anything else on hand will do the job.
Print — no supports needed.
Fix the mount to the wall (screws or a strong adhesive/Command strip, depending on your wall).
Rest the HomePod Mini into the cradle at your preferred angle, routing the cable down.
Apple HomePod Mini
If you mounted one, I'd love to see it — post a make!
License:
Creative Commons — Attribution — Noncommercial
SpiceWeasel
