March 10, 2024
Description
6 sides Love Lantern with changable panels and top and bottom parts
---
+ 4 test files to check if your slicer and printer settings are right
---
More parts for this Lantern
https://cults3d.com/en/3d-model/home/love-lantern-additional
Love Collection
https://www.printables.com/@C47_3d/collections/1236702
---
To assemble put 6 bars in the bottom part all the way till you hear and feel a click, then top part, then panels
You can disassemble it and assemble again if needed (like to store the lantern to use less space)
It should be safe to hold the lanter by the top part but it depends on your prints (if it was hard to assemble it will hold stronger
You can additionally use a string around bars. They have some cutouts on the top. Then you can hold the lanter by the string
---
May be best with led tealight but real flame ones will work too
If you want the light to fall on the wall use original panels (with holes). To view the lanter from the front side it should be better to use diffused versions ('5hearts' and 'hearts2' panels on photos where printed in diffused versions)
---
Based on my Lantern and my LoveCube
---
Tested with 0.4mm nozzle
Should be printed with 0.2 or 0.1mm layer height
Printed with PLA
Viva La Bronze Prusament
Lipstick Red Prusament
---
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
C47_3d
