This Is Fine - 3D Printer on Fire - Shadow Box

This one was suggested by a Patreon member and really liked the idea. So I modified the existing "This is Fine" shadow box to appeal to us, crafty 3D printing people 😅

Any resemblance to a real 3D printer is purely coincidental 😉

I've used the following colors:

• Plate 1:  
  - Geeetech PLA Black  
  - at layer #3 - 0.6mm swap to Bambu Lab PLA Matte Latte Brown
• Plate 2:  
  - Fillamentum ExtraFill PLA Luminous Yellow  
  - at layer #4 - 0.8mm swap to Fillamentum ExtraFill PLA Crystal Clear Tangerine Orange
• Plate 3:  
  - Geeetech PLA White  
  - at layer #3 - 0.6mm swap to Fillamentum ExtraFill PLA Chocolate Brown
  - at layer #6 - 1.2mm swap to Fillamentum ExtraFill PLA Mukha
  - at layer #9 - 1.8mm swap to Geeetech PLA Black
• Plate 4:    
  - Fillamentum ExtraFill PLA Luminous Yellow  
  - at layer #4 - 0.8mm swap to Fillamentum ExtraFill PLA Crystal Clear Tangerine Orange
• Plate 5:     
  - Polymaker PolyTerra PLA Army Dark Green 
  - at layer #4 - 0.8mm swap to Fillamentum ExtraFill PLA Green Grass
  - at layer #7 - 1.4mm swap to Polymaker PolyTerra PLA Army Brown

The colors are just guidelines, you can get creative with the color scheme for a personal touch.

It consists of 5 numbered plates.

You can find the box to display this set here:  https://www.printables.com/model/479648-shadow-box

The box with lid and the wall mountable box are both Club member exclusives. (Box with lid also available for individual purchase on Cults3D)

Print settings

Plates

• No supports
• 100% infill
• Arachne wall generator recommended

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller subscription.