GSO 8X50 RA to Guide Scope Adapter

Modeled a 51mm x 0.6 pitch thread, seems to work great for the GS0 5X80 OTA.  ID of the 1.25" eyepiece hole may need a bit of sanding to fit - wanted mine to be snug.  

I printed out of PLA with 10mm brim using a .025mm nozzle. I increased perimeters to make 100% solid.  I did this since I don't recommend 100% infill on delicate cylinders - may ruin the print from changing between concentric to linear motion. 

Also used adaptive layer height and used 0.07mm layer heights for the threads.