February 10, 2024
Description
A low profile easily 3D printable case for Steve Cousins SC126 Z180 small computer board.
I printed mine in transparent PLA, 30% fill. Bolts: Four M3x25 (or 30mm) Four M3x8mm. Four M3 wingnuts, Four M3 Nyloc nuts. Print the top and bottom case halves flat side down. Once printed, I heated the head of a M3 bolt with a lighter and gently pressed that into the nut recesses. This helps ensure the bolts will seat nicely flush when fitted.
Enjoy!
License:
Creative Commons — Attribution — Noncommercial
10
ChrisARR
