Lamp Mount for Prusa MK3/MK4

This is probably a pretty niche design, but maybe someone else will find it useful.  A mounting point for generic LED lamps, styled for the MK4 but will fit the MK3 just fine.  The spare M3 square nuts and M3x18 bolts left over from the kit will work.  Remove the existing bolts (one at a time, so as not to loosen the Z-Axis) and use the longer ones, all the way through.

I used this lamp and it is sized for that gooseneck, but any 3/8" lamp should work if Amazon stops selling that one.

If you remove the clamp on base (I used a dremel), the screw-on portion will fit in the socket of this mount, giving you a nice, low profile lamp for your printer.