Thermoworks Signals System Holder

This is a storage and use solution for the Thermoworks Signals BBQ System. The system is comprised of the Monitor itself, 3 color-coded Food Probes, 1 color-coded Ambient Chamber Probe, a clip to hold the Ambient Probe off of the surface of the grill/smoker, Power Adapter and Cable.

I was always misplacing various parts of the system and the Monitor itself is pretty picky about which Power Adapter is used to charge it. I only got it to reliably charge with the included Power Adapter, which I had misplaced various times over the years. This storage solution contains all of the elements of the system so they're more easily kept track of. The Monitor area has a cutout so that the Monitor can be charged while still in the system.

The probe holders are designed specifically to alleviate cable strain. The food probes are fairly long in both dimensions. As a result many of the other probe holders I've seen are too small and cause excessive cable strain to store the wire. So pay particular attention to how the Food Probes are stored on the Food Probe holders as they can basically fit in any direction you want but only one direction keeps it from bending the wire too much. The width of the holder should be narrow enough to hold the plug end of the probe in if you have the silicone color ring on it.

The Food Probe Holder is included but can be found here: https://www.printables.com/model/758474-thermoworks-pro-series-food-probe-holder

The Ambient Probe Holder is included but can be found here: https://www.printables.com/model/758473-thermoworks-pro-series-ambient-probe-holder

Each of the probe holders has one Universal side and one Probe Specific (Food/Ambient) side which slip fit together but can be secured with CA glue. The Probe Holders in a specific direction on the Holder to keep them tucked behind the power cable and to avoid having them stick out into space.

Print Settings

Printer Brand:

Bambulabs

Printer: 

Bambu X1C

Rafts:

No

Supports: 

No

Resolution:

.20 mm

Infill: 

Doesn't need a lot. 7-10% should be sufficient.

Filament: Sunlu PLA, PETG Various

Category: Kitchen & Dining