February 10, 2024
Description
The bow on the original model was just slightly too long. It should rest on the teeth of the plate in order to grip the fabric.
I did not make any changes to the toothed plate.
Assemble with 3mm x 8 or 10mm screws. I did need to ream out the holes in the toothed plate just a tiny bit.
Printed on Ender 3Pro in PLA. PrusaSlicer settings: .2 layers, 20% infill, 5 top and bottom layers, 4 perimeters.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
Reba1
