Fire TV & other remotes stand / holder station

slicing recommendations:

-0.2 to 0.3 layer height
-2 walls and “print thin walls” or Arachne Walls ON(!)
-0-15% Gyroid infill (if you use <10% infill i recommend 5-6 top layers)
-BRIDGing ON!! (lower down the "minimum bridge wall length" in cura)
-supports only if you want but not necessary when bridging is on

construction file (Microsoft 3D Builder/3mf) with thicker outer walls included so you can customize a bit if you want:)

sorry for the strings on the cover photo → this was wet PETG and a broken nozzle…