Fysetc Voron V0.2 R1 Umbilical Strain Relief

My V0.2 was having issues with it’s cable coming lose and causing interruptions mid print. This is my solution to try to fix this problem without replacing anything. The goal is to keep the plugs from moving and letting the cables do all of the flexing. 

If you have a Fysetc Voron V0.2 R1 Kit, this mod coupled with my Remix of the Top Hat Extension will keep the umbilical cables away from the acrylic during prints. ;) 

Note: You will need two M3x10mmm or M3x12mm bolts to attach the Rear Deck strain relief to the Z extrusions. (They are pre-tapped on this kit)

Don’t forget to re-run input shaper as this will change the values. Ultimately, a MUCH more flexible cable would be ideal.