Desk Holster for Sig Sauer P365

A friend of mine wanted a holster to screw into the bottom of his desk, but couldn't find one in the orientation he wanted. This holster clips around the trigger guard. This makes it easy to put in, but a little difficult to pull out. The thumb pad is there to brace against to help pull it out.

There are three versions, right handed, left handed, and dual handed. The only difference between these are the placements of the thumb pad. The right handed version is the original, and the only version that has been tested, so if you have problems with the other versions please let me know.

The gun I designed this for had some grip tape on the slide, so you may find it a little loose on the barrel.

I didn't design this to be printed in any particular orientation, but keep in mind that the first place a print breaks is usually between layers. The parts that clips into the trigger guard has to flex, so keep that in mind while choosing a printing orientation. This was made to be printed with PLA, other plastics might have different flexibilities.