Ceramic Tile End Table - 30cm

Printable parts to make a small end table out of spare 30cm tiles.

The ceramics store across the street was throwing out old sample tiles, I upcycled a few of the more interesting ones into mini tables.

To attach the legs you can use M3 screws and inserts, or better yet, chemically weld them with some 3D gloop (or acetone if printed with ABS/ASA). To attach the tile permanently, use a suitable adhesive, this will also solidify the top surface and help prevent wobble.

I found that the tiles had fairly loose tolerances which left gaps on some tables. You could use leftover grout to fill the gap, or scale the model down to fit your tile more snugly.

One last note, print the table in a rigid material to help avoid wobble. Standard and stiff PLA is fine.

Enjoy!