May 8, 2024
Description
Printed using TPU as slow as possible. I recommend to print it with the screen facing up with snug supports, I found those easiest to remove and prevented large overhangs to limit. Edit the thickness of the case in the slicer settings to 25mm from 26.5mm if you want less play.
A very durable case. Stringing is pretty likely as it needs to cross over several times to make holes for buttons, so make sure to have some precision scissors ready!
Feel free to buy this here if you don’t want to deal with the tuning and fiddling I had to go through!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
dildesigns
