Sandpaper Cutting Template for Sanding Sticks

This is a template I made and printed to make cutting strips of sandpaper easier for these sanding sticks https://www.prusaprinters.org/prints/22236-customized-sanding-sticks-with-labels

Height is 3mm but you can adjust the Z up or down in your slicer as you see fit. I found any less than 3mm the exacto blade I use had a tendency to jump up on top of the guide(and far too close to my fingers).

Printed in PLA with 20% infill at 0.2mm SPEED setting in PrusaSlicer.