Egg Storage Box for fridge

The latest iteration of my egg storage solution for the fridge. These are designed to work in a pair on the side of the bottom shelf in our fridge. They perfectly fit back to front with no wasted space. The finger hole is designed to pull the box out far enough to remove eggs without taking the whole box out, like a drawer.

I print in PLA and use M3 screw to assemble. I tried using glue joints and epoxy but they didn't hold up.

Hardware needed (LP = low profile):

• 4 M3x12mm LP Socket Head - bottom corners 
• 4 M3x8mm LP or Regular Socket Head - top corners 
• 2 M3x6mm LP Socket Head - bottom, middle of long sides
• 4 M3x6mm LP Socket Head - middle side connections

Screw lengths are mostly adjustable to be 1mm shorter or several mm longer.

The M3 low profile socket head screws I got have a approx 1mm thick head and use a 2mm allen bit, I got them from Aliexpress.