Heart Shaped Box

Heart shaped box with a smile. 

There are two major versions of the box parts. One with small tabs that clip into place so the tops will stay put, and a version with no clips where the tops just rests on the body with a lip for alignment. The clips are tiny, so if your printer is not super dialed in, you may want to use the no clip versions.

There are three versions of the top. One with a cut out face, one with it raised, and one that is flush. For the flush version, you will need to split to parts in Prusaslicer and set the color. You will need supports for the raised version, and probably for the inverted cut out version.

Added a dual color XL 3mf with PETG supports for the cut out version.