Jupiter Lamp for Bambu Lab LED Kit 001

I normally publish and update all my models at MakerWorld. They are only here on Printables to keep the accounts consistent.

Please download the newest version here at MakerWorld.

I like Ryno600's Jupiter Lamp, but I wanted to use the original Bambu LED Lamp Kit 001, so I made this remix.

You can use it with the original Bambu Lab LED Lamp Kit 001 – or a clone like this from AliExpress. which is much cheaper.

I wanted a two color version. If you don't have a MMU or AMS you can easily do a filament color change at 7.4mm. Or just print it as single color.

I used Bambu PLA Basic Beige with .2mm layer height without support. I highly recommend to use a big (!) brim to ensure good bed adhesion. The ball needs 100% infill, I used concentric, which worked great.

I also uploaded the 3mf file.

Tip: If you don't like the final hue or brightness of the lamp just print a thin cylinder in another color and place it directly on or inside the LED puck to change the hue and brightness.