Articulated Rpi Camera v2 Holder with Snapfit Spherical Joints

Rpi camera v2 holder/mount with articulated snapfit joints and mechanical interface to the ethernet RJ45 female connector of your raspberry 3/4. 

The snapfit joints allow to adjust the camera orientation. 

All mechanical interface are either snapfit or dove-tail type. Neither adhesive nor fasteners are needed. The RJ45 male dummy connector doesn't touch the electric pins of the female counterpart. The dove-tail parts can be fitted together by means of an hammer with plastic tip.

The GCode files include the required support structures. The support structure for the snapfit spherical joints can be easily removed by twisting them with a pair of tweezers.

The snapfit spherical joints have to be mounted 1 by 1 and oriented step by step. Fine tuning of the fully assembled joint chain will lead to a rapid unscheduled disassembly. Nevertheless, once correctly oriented, the joint chain will be stiff and resistant to impacts.

I personally use it to monitor my prints by means of OctoPrint.

Tested on PRUSA Mini with PETG (PLA is fine as well). 

Constructive comments and returns of experience are very welcomed! Have fun!