September 22, 2021
Description
A bit of bling for the CR-10 Smart printer - the left side one will eventually be modified into a camera mount.
Printing:
Should be OK as is without supports - I printed both with a brim to aid bed adhesion.
The right hand one is thin as the clearance with the print head at x=290/300 is tight, check it and maybe use some double sided tape to hold it in place
Printer Brand:
Creality
Printer:
CR-10
No
Supports:
No
200
Infill:
100
License:
Creative Commons — Attribution
7
Snowdonia 3D Printing
