A very basic drop-in keyboard case designed specifically for the 42 Keebs version of the Lumberjack-C but you should be able to easily move the standoffs in the STL for any other versions.
- Prints in two halves (needs to be glued together!) or as one piece on larger printers.
- Height is for Kailh v1 + MBK caps but should be suitable for most low profile setups.
- Standoffs are positioned for the 42Keebs Lumberjack-C version of the kit, two on either end and one off-centre.
- The USB port opening has a small support in the centre to help create a cleaner bridge, this can be cut away with a knife.
- File versions: Left and right side split, and one piece both with and without corner support rafts to prevent lifting.
- Requires 5x M2 thread inserts to be glued into each standoff (Inner: M2, Outer: M4.5, Length: 6mm) Example on Amazon
Lumberjack-C on the 42Keebs Store
Kit designer Peej on Github
Another Fox
